ReadyMadeRC
PICOSWITCH - RADIO CONTROLLED RELAY
| Max relay voltage | 60VDC, 125VAC |
| Max relay current | 1A @ 24VDC, 0.5A @ 125VAC (60W lightbulb) |
| Relay resistance | 100 mΩ max |
Weight:, 7.6g / 0.27oz, Specifications:, Note: PicoSwitch has a maximum voltage rating of 125VAC, meaking it unsuitable for toggling 220VAC applications., Diagrams:, , Dimensions:, 0.75" x 0.62" x 0.62", Applications:, Control of lighting systems on RC planes, boats, cars.,
Product Description PicoSwitch is a relay switch that you toggle ...ReadyMadeRC
BATTLESWITCH RADIO CONTROLLED 10A RELAY
| Max relay voltage | 240VAC |
| Max relay current | 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC. |
| Relay resistance | 100 mΩ max |
Weight:, 21g / 0.72oz, Specifications:, Diagrams:, , Dimensions:, 1.25" x 1.25" x 0.9", Applications:, Control of powerful auxiliary weapons in RC combat.,
Product Description BattleSwitch is the larger, 10A version of our ...ReadyMadeRC
DOUBLESWITCH RADIO CONTROLLED DUAL 8A RELAY
| Max relay voltage | 240VAC |
| Max relay current | 8A @ 12VDC, 8A @ 240VAC. |
| Relay resistance | 100 mΩ max |
Weight:, 23g / 0.8oz, Specifications:, Diagrams:, , Dimensions:, 1.65" x 1" x 0.72", Applications:, Control of powerful auxiliary weapons in RC combat.,
Product Description DoubleSwitch is a doubled version of our popular ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) WITH MOTOR, ESC, AND SERVOS
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Sample Battery Setup:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, ,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
3DR PIXHAWK
| Weight | 38g (1.31oz) |
| Width | 50mm (1.96") |
| Thickness | 15.5mm (.613") |
| Length | 81.5mm (3.21") |
Note:, Pixhawk is a PPM-input autopilot, which means that it gets RC input from a single cable to the receiver, either via the PPM port, the Futaba S.BUS port, or the special satellite receiver port for Spektrum gear. Most modern RC receivers (and all those sold by 3D Robotics) allow for PPM output, but some, such as non-S.BUS Futaba receivers, do not. If your receiver does not support PPM output, please add a PPM encoder board option to your order below., Pixhawk includes:, , Options:, , Microprocessor:, , Sensors:, , Interfaces:, , Power System:, , Weight and Dimensions:, ,
Pixhawk is an advanced autopilot system designed by the PX4 ...ReadyMadeRC
SMARTFPV - GOPRO LIVE VIDEO CHARGE BOARD (STRAIGHT)
It plugs in to GoPro 30pin bus connector on back of camera and gives ability to get live video, charge camera and record HD video at same time. Board has 3pin Molex connector. Supplied 30cm cable will connect to Molex connector and provide you with Immersion RC/Fat Shark style connectors with convenient pin functions:, Black, Camera compatibility:,
This board is designed for GoPro HD HERO, HERO2 and ...ReadyMadeRC
PICO FPV COMBO (5.8 GHZ)
Package Includes:, , Camera Choices:, RMRC Pico V2 Camera (, Antenna Choices:, TrueRC Nano 5.8 RHCP Antenna, Altitude RC 5.8 Transmitter and optional True RC 5.8 Nano Antenna:,
This is a customizable combo for those looking for high ...ReadyMadeRC
RMRC SKYHUNTER - KIT
| ATTENTION | According to |
| Wingspan | 1800MM |
| Length | 1400MM |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless outrunner motor 2820-3540, 800-1400kv (9-12" prop) |
| ESC | 40A - 60A |
| 3 Servos | HS-85MG |
| Battery | Li-Po 3s-4s 5000mAH - 10,000mAH (TB54 max. 3S) |
| Center of Gravity | 1/3 of wing from leading edge |
Here is an build video series on the Sky Hunter:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
RMRC-520 520 LINE CCD CAMERA (NTSC)
| PAL | (H)752x(V)582; NTSC |
| PAL | 1/50~1/100,000 Sec; NTSC |
For users of UHF RC systems: It has been reported that this camera may emit noise in the 433MHz range, possibly reducing the range of your LRS system. If you are using one of these system, I recommend using one of my other cameras which have all been reported to work with no interference. I have not had any other reports of interference with other devices such as GPS receivers or other RC receivers.,
Mini high resolution camera 1/3 Sony super HAD CCD 520TV ...ReadyMadeRC
RMRC-520 520 LINE CCD CAMERA (PAL)
| PAL | (H)752x(V)582; NTSC |
| PAL | 1/50~1/100,000 Sec; NTSC |
Also Includes:, , For users of UHF RC systems: It has been reported that this camera may emit noise in the 433MHz range, possibly reducing the range of your LRS system. If you are using one of these system, I recommend using one of my other cameras which have all been reported to work with no interference. I have not had any other reports of interference with other devices such as GPS receivers or other RC receivers.,
Mini high resolution camera 1/3 Sony super HAD CCD 520TV ...ReadyMadeRC
CUSTOM 0.9 FPV STARTER PACKAGE: 900MHZ
| Instructions | HERE |
Package Stats with the following components:, , NOTE: if you purchase the "no camera" option, the transmitter will only come with the "stock" cable and does not include the custom ReadyMadeRC cable used for attaching it to the rest of the Ready Made RC cables or transmitter battery., Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,
Eagle Tree OSD Pro-Ready...see option below! Built off of the ...ReadyMadeRC
ZEPHYR 2 ZII KIT
| http | //fpvlab.com/forums/showthread.php?1966-New-molded-Ritewing-Zephyr-II |
| http | //www.rcgroups.com/forums/showthread.php?t=1525711 |
Description from Ritewing RC:, The new injection molded EPOR Z II is finally here ,after 2 1/2 years of tweaking this beast she is finally making an apearance.She has the wing area of the older Z 60 in a 54 WS ,770 SQ inches of wing area makes her a monster little wing. She now will launch and land much easier than the past versions., This package includes:, Molded wings with equipment bays already included.,
Basic build manual located HERE . Review on Model Airplane ...ReadyMadeRC
ZEPHYR XL (ZXL) KIT
| http | //www.youtube.com/watch? |
| http | //www.youtube.com/watch? |
| http | //www.youtube.com/watch? |
| http | //fpvlab.com/forums/showthread.php?1966-New-molded-Ritewing-Zephyr-II |
| http | //www.rcgroups.com/forums/showthread.php?t=1525711 |
The original ZII description is below. We'll try to modify the specifics as we get them:, Description from Ritewing RC:, The new injection molded EPOR Z II is finally here ,after 2 1/2 years of tweaking this beast she is finally making an apearance.She has the wing area of the older Z 60 in a 54 WS ,770 SQ inches of wing area makes her a monster little wing. She now will launch and land much easier than the past versions., This package includes:, Molded wings with equipment bays already included.,
This is the new ZXL 81" monster! It starts with ...ReadyMadeRC
LAYERLENS FOR GOPRO HERO3 (V2)
For this reason, FPV Manuals developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. Fully assembled, LayerLens for the GoPro 3 weighs only 7.5g — a small fraction the weight of the full GoPro case. LayerLens has become the standard lens protection product in the fields of RC and FPV where a GoPro is used outside of its standard housing.,
Details This is the new revision of LayerLens for the ...